ABB solves level measurement problem for wastewater plant

Reliable and accurate measurement with ABB’s K-TEK LM200 level transmitter

An ABB K-TEK LM200 laser level transmitter is helping a well-known wastewater plant return to reliable level measurement, after issues with a competitor’s hydrostatic level transmitter.

The company uses level measurement to activate pumps to a pre-treatment plant when the water reaches a pre-determined volume. Previous measurement techniques failed to cope with the amount of debris and grit present in the effluent, which clogged up sensors, causing inaccurate readings and making them difficult to re-calibrate.

The ABB K-TEK LM200 laser transmitter is ideal for this application and was purposefully designed for the measurement of dry bulk solids, opaque liquids, and slurries at distances of up to 200 feet. It features an advanced timing system and sophisticated, self-correcting signal processing function that allows it to accurately and reliably measure level, distance, and position in the harshest of conditions.

A key feature of the LM200 is its ability to work in the presence of dust, vapours, or turbulence. A rugged, powder coated aluminium enclosure, rated for IP65 or NEMA 4X, with CL II and III, Div 1 and 2, Gr E, F, G dust ignition proof ratings to FM and CSA, ensures operation in a variety of challenging environments. Stainless steel dust tubes prevent dust build-up and protect the optical lens from being coated.

Non-contact measurement technologies, such as ultrasonic and open air radar, have an inherent “beam spread” nature (up to 24˚) and find it hard to deal with issues such as dust, vibration and constantly changing levels. However, the LM200 overcomes these by combining accurate, long distance laser measurements with no beam divergence (less than 0.2˚).

The system design allows the software to perform distance measurements quickly, dedicating more time for sophisticated signal processing, data analysis, and distance display. An intelligent “Last pulse‟ capability means the LM200 can select true signals from among the many that are reflected from dust clouds, agitator blades, or other obstacles.

For more information please email moreinstrumentation@gb.abb.com or phone 0870 600 6122, ref. “level measurement”.

Advertisements

Leave a Reply

Fill in your details below or click an icon to log in:

WordPress.com Logo

You are commenting using your WordPress.com account. Log Out / Change )

Twitter picture

You are commenting using your Twitter account. Log Out / Change )

Facebook photo

You are commenting using your Facebook account. Log Out / Change )

Google+ photo

You are commenting using your Google+ account. Log Out / Change )

Connecting to %s


%d bloggers like this: