Posts Tagged ‘energy efficiency’

Enviropower maintains constant power output with ABB gas analyzers

February 25, 2015


We are delighted to reveal that our highly reliable gas analyzers, which haven’t suffered a single time loss failure in five years, have enabled a waste to energy plant in West Sussex to achieve its target of 85% percent operating time.

The plant, owned and operated by Enviropower in Lancing, has a 5MWe capacity, burning around
60,000 tonnes a year of biomass fuel derived from construction and demolition waste.

Built in 2008, the plant uses an ABB ACF-NT multi-gas analyzer on each of its two combustion lines. Used to measure all the gas emissions from the plant, their data is sent to an emission reporting system, allowing Enviropower to prove that it is meeting the requirements of the Environment Agency.

Working with its construction company for the project, Enviropower turned to ABB as the analyzer vendor because of the high reliability of our products and our unrivalled ability to integrate complete solutions.

Because the plant’s operation is permit based, it has to meet certain criteria. One of these is the use of equipment that complies with the requirements of the Environment Agency’s MCERTS standards. Its permit specifies a minimum oxygen content of 11%, which will shortly reduce to six percent. As such, it was essential that the analyzers had the flexibility to adapt to changing regulations. What’s more, it was vital that the analyzers were highly reliable and that servicing was kept to a minimum.

The ABB ACF-NT emission and process monitoring analyser ticked all the boxes. Offering continuous, quantitative and selective measurement of numerous gasses, including HCl, HF, H2O, CO, CO2, SO2, NOX, NH3, N2O, O2, TOC and NMHC (non-methane hydrocarbons), the analyser achieves high stability, accuracy and reliability through proven FTIR technology. It also offers integration and display of signals from other instruments, including data on dust, mercury, flow, pressure and temperature.


ABB launches new licence-free HART handheld configurator

March 13, 2013

Thanks to our new lightweight and robust handheld DHH805 configurator, the cost and complexity of configuring instruments in the field has now been significantly reduced.

Designed for use with any HART device, the DHH805 can be used with our very own instruments as well as those from other manufacturers without the need for an exclusive licence, providing a truly universal device offering a greatly reduced cost of ownership.

The mobile handheld DHH805 allows for easy parameterization of any HART device from any manufacturer as long as its EDD (Electronic Device Description) is released from the HART foundation. Thanks to the EDDs necessary for the update being available to download directly from the HART foundation or a manufacturer’s website, the DHH805 does not require expensive licence renewals.

Device configurations can be created off-line, stored in the DHH805’s memory and uploaded to the device at another time. Featuring our common HMI platform, the configurator can be powered up in less than 10 seconds and is supported by a powerful battery, providing 80 hours of continuous use before recharging.

The DHH805 is delivered with a Windows compatible PC-Tool that will notify users of firmware and software updates that may become available, which can then be downloaded or updated free of charge. Users can also use the DHH805 PC-Tool to activate and register the handheld device; carry out EDD listing and uploading; and make changes to the device’s configuration settings.

The device is fully certified for hazardous areas (IEC Ex, ATEX and FM) and is supplied with a 2 GB SD memory card that can store up to 1000 HART EDDs, together with 200 separate device configuration files.

For more information on ABB’s DHH805 handheld configurator please email or call 0870 600 6122 ref: ‘DHH805’.

The true cost of low cost

February 8, 2010

Neil Webster,  General Manager at ABB UK instrumentation, questions the longterm value of bargain manufacturing equipment

Everyone loves a bargain, especially when money is tight. Despite the encouraging upturn in the manufacturing sector, the recovery is still fragile at best and there is still the pressure on to control costs as tightly as possible.

So no one could really blame manufacturing companies for responding with a bit of bargain hunting. Even so, we’ve all experienced the flipside of bagging a bargain at one time or another, which is that you get what you pay for. And this is as true for hard-pressed companies as it is for the rest of us.

The trouble is that the hunt for a bargain too often focuses exclusively on the upfront cost of new kit and that can be an expensive mistake in the long run.

Saving the pounds

First there’s the equipment itself. Suppliers work hard to include all the latest innovations and features in their top-of-the-range equipment. Standardised hardware platforms can cut down on the requirement to stock spares, for example, while self-diagnostics can help optimise maintenance programmes. Of course, that’s all in addition to the fact that better quality instrumentation can boost performance in core areas such as improved process control, more precise chemical dosing or improved energy efficiency, to name but a few.

But the differences don’t end with the quality of the actual equipment. Suppliers who are being screwed to the wall over pricing are far less likely to throw in additional service and support. Whether you find yourself on the end of a premium-price technical helpline, or simply find that you have to wait longer for an engineer to come and fix a problem, there will ultimately be a price to pay.

Before you all start muttering that “he would say that, wouldn’t he”, I admit it’s in my best interest as a supplier to promote sensible equipment pricing. But the point is that reputable suppliers deliver a lot more to the industry than cheap equipment. We’ve all become used to including innovation, technical know-how and service support as part of the deal, and it’s these added benefits that will be eroded if it comes to an all-out price war.

Moreover, firms that invest during times of recession are often those that are best geared for success when recovery comes. With encouraging signs of growing demand now upon us, companies should surely start preparing themselves to capitalise on this recovery by investing in technologies that are proven to bring improved levels of efficiency, rather than relying on existing plant resources.   

Tough times mean that purchasing departments may feel that they can’t afford to do anything other than look for the cheapest unit cost. The irony is that taking that approach, rather than looking to the future and investing in the latest innovations, may well leave them paying a much higher price in the end.

Take control with better actuators

November 25, 2009

Neil Webster, General Sales Manager at ABB Instrumentation, explains how investing a little more in using the right actuator will end up saving users money in the long run, thanks to higher process efficiencies and reduced energy consumption and maintenance.

When it comes to working, many electric actuators are part-timers. They don’t offer continuous operation without overheating their motors, so they operate in cycles meaning that they’re only available for duty between 25% and 50% of the time.

This common mode of operation is known as S4 in the IEC 34-1 standard. It’s characterised by the maximum percentage of allowable “on time” in each cycle, as well as the maximum number of cycles permitted per hour (typically around 1200). The rest of the time is spent allowing the motor and gear train to cool down to make sure it does not reach the maximum permissible temperature specified by the manufacturer.

To avoid overheating, these cheaper S4 devices tend to have a relatively wide dead band. The dead band is a measure of the deviation between the actuator position demanded by the process and the actual position of the actuator. The actuator only starts to move when the difference between the two positions breaches the pre-set dead band.

Some S4 devices use an internal heat sensor to adjust the dead band and make sure they stay below the maximum permissible temperature. This strategy is known as thermal de-rating. It means that the default dead band is typically 0.5% but can reach 5% in some S4 actuators.

This kind of operation is simply not good enough for many companies. Fast, precise control demands an immediate response that carries the control element quickly and smoothly to where the process needs it.

S9 actuators are smooth operators

There are actuators available to provide uncompromising performance. These actuators offer a mode of operation known as S9, in which they are continually energised to offer the best possible response. For example, ABB’s Contrac electric actuators offer S9 operation, enabling them to operate with a dead band of just 0.05% without any thermal de-rating, even when operating in high ambient temperatures. In some cases, a wider dead band is desirable to maintain the stability of the process, but the point is that S9 operation allows the dead band to be optimised to suit the process, rather than the actuator.

ABB’s S9 actuators also offer a more immediate response because the motor constantly balances the forces from the process with the motor to maintain the control element in dynamic equilibrium.  This improved control performance may come at a higher upfront price but more accurate control will result in a more efficient process.

The advantages of S9 operation do not end with improved process control. Even without the boost to the bottom line that better control often delivers, many plant operators stand to save money in the long run by investing in higher-quality, S9 actuators. That’s because they offer a vastly increased service life and much lower maintenance costs.

Maintaining lower lifetime costs

Permanently energised actuator motors can increase or decrease their torque smoothly and proportionally, according to the deviation between the actuator position and the demand signal. This smooth operation avoids the shocks and acceleration associated with the constant starting and stopping of S4 mode operation, significantly increasing the life of all the mechanical components involved. Other factors, such as oil lubrication and the use of spur wheel gears, further reduces friction and internal mechanical wear.

S4 actuators may need to be stripped down and maintained after less than one year. Yet S9 actuators like ABB’s only need stripping down every 10 years, as long as the recommended checks are made in the mean time.

The ideal maintenance interval varies according to the duty, but some of the latest actuators now have an on-board diagnostic computer that monitors operations and can actually predict the optimum maintenance interval. Over a 10-year period, cumulative maintenance costs for S4 actuators on a medium duty are likely to be of the order of 15 times more than maintenance costs for S9 models.

Think ahead to save money

When budgets are tight, it’s always tempting to opt for the cheapest offer. But in life you get what you pay for and actuators are no exception. Investing a little more in improved control will impact on the efficiency and profitability of many processes, as well as reduced energy costs. In addition, “hidden” extras such as additional maintenance costs for cheaper actuators are soon likely to outweigh any initial savings. Even better, today’s fit-and-forget S9-mode electric actuators should give reliable service for over 20 years, giving hard-pressed engineers one less thing to think about.